This experiment is for advanced students.


Sparks flying off in all directions…that’s fun. In this lab, we will show how easy it is to produce those shooting sparks. In a sparkler you buy at the store, the filings used are either iron or aluminum.


The filings are placed in a mixture that, when dry, adheres to the metal rod or stick that is used in making the sparkler. The different colors are created by adding different powdered chemicals to the mixture before it dries. When they burn, we get red, blue, white, and green.


[am4show have=’p8;p9;p11;p38;p92;p52;p91;’ guest_error=’Guest error message’ user_error=’User error message’ ]


Materials:


  • Card stock
  • Alcohol burner
  • Iron filings
  • Gloves

It’s tempting to use a handful of filings to produce a literal shower of sparks. The effect is actually better with small amounts. To accomplish anything with a large pile of filings would require you to blow REALLY hard to make a filing cloud that will combust well. A larger reaction means more sparks flying around. The amount of filings recommended in the lab is a safe amount. Increasing the amount used increases the danger. You could take an interesting, fun, and safe lab and transform it into something that burns the hair off your arms. Besides, burning hair doesn’t smell good.


Here’s what’s going on in this experiment:


Iron + Oxygen –> Iron Oxide


Iron and Oxygen are burned to produce Iron Oxide


This is the balanced chemical equation: 2Fe + O2 –> 2FeO


C3000: Experiment 54


Download Student Worksheet & Exercises


Handling iron filings is not dangerous. Minor things that can occur, such as: Iron filings can stain your skin gray; if there is a large filing in your container, rubbing your finger against it could give you a painful splinter.


Return unused filings to your container. Any surface these filings touch turns gray, so keep your filings corralled. Cleaning your work surface with a wet paper towel is the easiest way to clean up.


Discard any unburned iron powder that is coating the area around your alcohol burner into a trash container outside. It is not toxic, but still….don’t use chemicals or experiment residue as a snack. Never a good idea.


What is going on here? When you build a campfire at the campground, why doesn’t the grill spark and burn up? The grill is iron, the filings are iron, and there is always oxygen available in the air. What’s the deal here? Combustion needs two things, fuel and fire. Not enough of either and nothing will burn. But a woodstove is made up of a lot more iron by weight than that little scoop of filings. It has to do with surface area. Take an equal weight of solid iron and iron filings. Put a match to the solid iron and all it gets is hot. Blow the same weight of iron filings into the flame and POOF! The key is surface area. Surface area can affect the way a chemical reaction occurs, and in this case, whether or not it occurs at all.


To better understand the effect of surface area, eat some candy! Put a whole Lifesaver candy in your mouth. Suck, move your tongue all over it, swish it back and forth in your mouth. You are not allowed to bite or swallow it. How long does it take to completely dissolve? Do the same thing with another Lifesaver broken into pieces. Which dissolved faster? The same thing happens with the iron. The smaller the pieces, the easier it is for the iron to burn. When you blew iron filings into the air above the flame, you increased the surface area even more by increasing the air space between the particles. An increase in surface area always makes things happen faster. Granulated sugar dissolves faster than sugar cubes, and a piece of wood burns faster after you chop it into kindling. Pay attention and you will notice other situations where increasing surface area speeds up physical changes and chemical reaction times.


An additional experiment that you can try on your own is burning steel wool. Properly prepared ahead of time, steel wool will spark as it burns up. A great emergency fire starter is a 9V battery and steel wool. Fluff up the steel wool and touch a portion of it across the terminals of the battery. The steel wool will burn just like it did with a match.


Steel wool is just a ball of really long iron filings. If you fluff out the steel wool and light it, it burns easily. If you do try this, do it outside over the lawn or an area of dirt. At some point in the combustion you will want/need to drop the steel wool or get your fingers singed.


[/am4show]


Have a question ?

Tell us what you're thinking...